News & Press Releases
Filter by:
Oct, 25 2024
Category: ITS/Enforcement
Category: ITS/Enforcement
HS-WIM System with Intercomp Strain Gauge Strip Sensors Gains 1A INMETRO Certification in Brazil
ITS System integrator Consilux has received Brazil's 1A INMETRO certification for an HS-WIM system incorporating Intercomp's Strain Gauge Strip Sensors.
ITS System integrator Consilux has received Brazil's 1A INMETRO certification for an HS-WIM system incorporating Intercomp's Strain Gauge Strip Sensors.
Oct, 03 2024
Category: ITS/Enforcement
Category: ITS/Enforcement
Idaho Transportation Department Uses LTR788™
After an enlightening demonstration, the Idaho Transportation Department has purchased and implemented LTR788™.
After an enlightening demonstration, the Idaho Transportation Department has purchased and implemented LTR788™.
Feb, 09 2024
Category: ITS/Enforcement
Category: ITS/Enforcement
Developing Accurate and Reliable HS-WIM for Direct Enforcement
Poland’s Overload Control program is a shining example of the impact of Strain Gauge Strip Sensors
Poland’s Overload Control program is a shining example of the impact of Strain Gauge Strip Sensors
Sep, 21 2023
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Strain Gauge Strip Sensors Enhance Cargo Control at Border Crossings
In 2018, Billion Prima Sdn. Bhd, a Malaysian owned company supplying x-ray cargo scanning products to ports and border crossings, approached Intercomp with the idea of integrating their cargo scanning technology and software with weight data collection.
In 2018, Billion Prima Sdn. Bhd, a Malaysian owned company supplying x-ray cargo scanning products to ports and border crossings, approached Intercomp with the idea of integrating their cargo scanning technology and software with weight data collection.
Jul, 10 2023
Category: ITS/Enforcement
Category: ITS/Enforcement
Advancing Road Safety Through Automated Inspections
The implementation of a new generation of Virtual Weigh Stations (VWS) is causing a paradigm shift in weight enforcement programs across North America.
The implementation of a new generation of Virtual Weigh Stations (VWS) is causing a paradigm shift in weight enforcement programs across North America.
May, 05 2023
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp Strip Sensor is Type-approved for HS-WIM Direct Enforcement in Brazil
In 2022, after technical developments and metrological certification, the Fiscal Tech solution with the use of Intercomp Strain Gauge Strip Sensors became the first HS-WIM system to be Type-approved by the National Metrology Institute (INMETRO) for direct enforcement in Brazil.
In 2022, after technical developments and metrological certification, the Fiscal Tech solution with the use of Intercomp Strain Gauge Strip Sensors became the first HS-WIM system to be Type-approved by the National Metrology Institute (INMETRO) for direct enforcement in Brazil.
Dec, 12 2022
Category: ITS/Enforcement
Category: ITS/Enforcement
LTR788™ Dual Wheel Load Scale Deployed in North Carolina
The North Carolina State Highway Patrol (NCSHP) Commercial Vehicle Enforcement Section has introduced the LTR788™ Dual Wheel Load Scales.
The North Carolina State Highway Patrol (NCSHP) Commercial Vehicle Enforcement Section has introduced the LTR788™ Dual Wheel Load Scales.
Nov, 04 2022
Category: ITS/Enforcement
Category: ITS/Enforcement
Texas Chooses Intercomp Scales for Statewide Commercial Vehicle Enforcement
Intercomp is proud to announce the purchase of vehicle weight enforcement scales by both by the North Central Texas Council of Governments (NCTCOG) and the Texas Department of Public Safety (DPS).
Intercomp is proud to announce the purchase of vehicle weight enforcement scales by both by the North Central Texas Council of Governments (NCTCOG) and the Texas Department of Public Safety (DPS).
Jul, 29 2022
Category: ITS/Enforcement
Category: ITS/Enforcement
Customized Portability for Heavy-Duty AX900™ Axle Scales
The AX900™ Axle Scale Trailer is a reliable and durable option for transporting AX900™ scales to areas not served by permanent truck scales.
The AX900™ Axle Scale Trailer is a reliable and durable option for transporting AX900™ scales to areas not served by permanent truck scales.
Jul, 22 2022
Category: ITS/Enforcement
Category: ITS/Enforcement
LTR788™ Scale Designed to Identify Overrated Tires in Dual-Tire Setups
The LTR788™ Dual Wheel Load Scale was created for direct measurement of individual tire loading within dual-tire configurations. This scale enables vehicle inspectors to identify overrated tires with safety, efficiency, and, most importantly, accuracy.
The LTR788™ Dual Wheel Load Scale was created for direct measurement of individual tire loading within dual-tire configurations. This scale enables vehicle inspectors to identify overrated tires with safety, efficiency, and, most importantly, accuracy.
Mar, 16 2022
Category: ITS/Enforcement
Category: ITS/Enforcement
MicroStrip™ Sensors at Intertraffic Amsterdam
Visit Intercomp at Intertraffic Amsterdam booth 01.211 to discuss MicroStrip™ Sensors for Data Collection.
Visit Intercomp at Intertraffic Amsterdam booth 01.211 to discuss MicroStrip™ Sensors for Data Collection.
Mar, 01 2022
Category: ITS/Enforcement
Category: ITS/Enforcement
New LTR788™ Weighs Dual Tires Individually on a Single Portable Scale
2022 Intertraffic Inspiration Award Nominee Bringing new capabilities to wheel load scales, the LTR788™ Dual Wheel Load Scale was created for direct measurement of individual tire loading in a dual-tire configuration.
2022 Intertraffic Inspiration Award Nominee Bringing new capabilities to wheel load scales, the LTR788™ Dual Wheel Load Scale was created for direct measurement of individual tire loading in a dual-tire configuration.
Oct, 28 2021
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp WIM Sensors in the Ohio Turnpike
Installation has begun on Weigh-In-Motion (WIM) sites along the Ohio Turnpike, a multi-year project where Intercomp strain gauge strip sensors were selected to be incorporated in WIM systems on the 241 mile (288 km) toll highway.
Installation has begun on Weigh-In-Motion (WIM) sites along the Ohio Turnpike, a multi-year project where Intercomp strain gauge strip sensors were selected to be incorporated in WIM systems on the 241 mile (288 km) toll highway.
Aug, 16 2021
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp Introduces CSP™ Portable Test Stand for Wheel Load Scales
Optimized for mobility, the CSP™ Portable Test Stand is easily transported using integrated forklift pockets and can be set up on any flat, level surface, such as a floor or truck bed.
Optimized for mobility, the CSP™ Portable Test Stand is easily transported using integrated forklift pockets and can be set up on any flat, level surface, such as a floor or truck bed.
Jun, 30 2021
Category: ITS/Enforcement
Category: ITS/Enforcement
Watch: Intercomp WIM Strip Sensor Strain Gauge Technology
This brief video gives an overview of why strain gauge load sensing is used in static and dynamic scales, the inherent characteristics of strain gauge load cells which make this performance possible, and how users can benefit from the sensors.
This brief video gives an overview of why strain gauge load sensing is used in static and dynamic scales, the inherent characteristics of strain gauge load cells which make this performance possible, and how users can benefit from the sensors.
Jun, 10 2021
Category: ITS/Enforcement
Category: ITS/Enforcement
AX900™ Axle Scales for Mining in Peru: Weight Compliance & Load Optimization
By using AX900™ axle scales for continuous weight monitoring during the loading process, the payload is maximized while avoiding overloaded vehicle conditions.
By using AX900™ axle scales for continuous weight monitoring during the loading process, the payload is maximized while avoiding overloaded vehicle conditions.
Apr, 13 2021
Category: ITS/Enforcement
Category: ITS/Enforcement
NTEP Certification for Intercomp’s TS30™ CPU
Intercomp’s TS30™ CPU with touchscreen indicator is now NTEP Class III/IIIL Certified for use in static wheel load weighing.
Intercomp’s TS30™ CPU with touchscreen indicator is now NTEP Class III/IIIL Certified for use in static wheel load weighing.
Feb, 11 2021
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp WIM Sensors in Ukraine for VWIM Stations
Intercomp’s Weigh-In-Motion strip sensors have been selected as the preferred sensor supplier and installed within High Speed Weigh-In-Motion (HSWIM) systems in Ukraine for commercial vehicle weight enforcement sites.
Intercomp’s Weigh-In-Motion strip sensors have been selected as the preferred sensor supplier and installed within High Speed Weigh-In-Motion (HSWIM) systems in Ukraine for commercial vehicle weight enforcement sites.
Nov, 20 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
LP788™ Low-Profile Wheel Load Sales
Now Showing: Learn how Intercomp's LP788™ scales offer ideal roadside direct enforcement capabilities, combined with revolutionary RFX® Wireless Weighing Technology and efficient Solar Power.
Now Showing: Learn how Intercomp's LP788™ scales offer ideal roadside direct enforcement capabilities, combined with revolutionary RFX® Wireless Weighing Technology and efficient Solar Power.
Nov, 04 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Automate Scale Operations with IntercompWIM™ and IntercompWIM™ Delta Software
Now Showing: Learn how IntercompWIM™ and IntercompWIM™ Delta Software fully automate scale operations with both portable and fixed, in-ground scales.
Now Showing: Learn how IntercompWIM™ and IntercompWIM™ Delta Software fully automate scale operations with both portable and fixed, in-ground scales.
Oct, 16 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp Announces Release of Ultra-Low Profile Portable Weigh-In-Motion Scales
Intercomp announces its new LS788-WIM™ Portable Weigh-In-Motion (WIM) Scale System, designed with groundbreaking features and a highly-transportable, low-profile form factor.
Intercomp announces its new LS788-WIM™ Portable Weigh-In-Motion (WIM) Scale System, designed with groundbreaking features and a highly-transportable, low-profile form factor.
Sep, 08 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
LS630-WIM™ Awarded OIML R134 Certification
Intercomp announces OIML R134 certification of its LS630-WIM™ portable system for use in low-speed Weigh-In-Motion (WIM) applications.
Intercomp announces OIML R134 certification of its LS630-WIM™ portable system for use in low-speed Weigh-In-Motion (WIM) applications.
Jul, 07 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Introducing Intercomp TS30™ Touchscreen CPU
Now Showing: Intercomp is proud to introduce the TS30™ Touchscreen CPU to its line of industry-leading portable vehicle weighing equipment.
Now Showing: Intercomp is proud to introduce the TS30™ Touchscreen CPU to its line of industry-leading portable vehicle weighing equipment.
Jun, 10 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp Introduces TS30™ Touchscreen Indicator for Remote Scale Operation
Intercomp, the world’s largest manufacturer of portable vehicle weighing and measurement products, has introduced its new Model TS30™ CPU, an advanced touchscreen indicator for self-contained operation of portable scales.
Intercomp, the world’s largest manufacturer of portable vehicle weighing and measurement products, has introduced its new Model TS30™ CPU, an advanced touchscreen indicator for self-contained operation of portable scales.
Apr, 17 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp WIM Strip Sensors Gain World’s First OIML R134 Certification for True Highway Speed Range Applications
Intercomp’s WIM Strip Sensors recently achieved OIML R134 Class 5E certification, to add to another industry first for high-speed WIM application with OIML R134 Class 10F certification for two, three or four row configurations of the technology.
Intercomp’s WIM Strip Sensors recently achieved OIML R134 Class 5E certification, to add to another industry first for high-speed WIM application with OIML R134 Class 10F certification for two, three or four row configurations of the technology.
Mar, 26 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
World Trade Center Enhanced Security with AX900™ Axle Scales
To protect the infrastructure and buildings onsite and in the surrounding areas, vehicle weighing capabilities at entry points are necessary to screen vehicles for overweight irregularities that could indicate the presence of dangerous material on board.
To protect the infrastructure and buildings onsite and in the surrounding areas, vehicle weighing capabilities at entry points are necessary to screen vehicles for overweight irregularities that could indicate the presence of dangerous material on board.
Jan, 24 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Bridge Protection with Strip Sensors in Kuwait
When Kuwait developed their large bridge project, a Weigh-In-Motion (WIM) system capable of functioning in a harsh environment and extreme temperatures was necessary for protecting the bridge from overweight traffic.
When Kuwait developed their large bridge project, a Weigh-In-Motion (WIM) system capable of functioning in a harsh environment and extreme temperatures was necessary for protecting the bridge from overweight traffic.
Jan, 03 2020
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Concessionaire’s HS-WIM in Brazil- COST 323
WIM performance tests, such as COST 323, are conducted to evaluate if the accuracy complies with the proposed legal performance requirements in Brazil.
WIM performance tests, such as COST 323, are conducted to evaluate if the accuracy complies with the proposed legal performance requirements in Brazil.
Nov, 08 2019
Category: ITS/Enforcement
Category: ITS/Enforcement
Case Study: WIM Accuracy and Reliability at Border
As the busiest commercial land port in the US transiting almost 7 million vehicle annually, WIM systems need to be accurate, maintain stable performance, and require minimal maintenance.
As the busiest commercial land port in the US transiting almost 7 million vehicle annually, WIM systems need to be accurate, maintain stable performance, and require minimal maintenance.
Aug, 29 2019
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: MN State Patrol Uses LS630-WIM™ for Portable Screening Operations
Portable WIM scales allow for temporary sites to be set up wherever enforcement efforts are needed, and increase efficiency and throughput of screening vehicles for weight violations. This is an efficient process saving time for both the vehicle operators as well as enforcement officials.
Portable WIM scales allow for temporary sites to be set up wherever enforcement efforts are needed, and increase efficiency and throughput of screening vehicles for weight violations. This is an efficient process saving time for both the vehicle operators as well as enforcement officials.
Jun, 13 2019
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note:WIM Pre-Selection Program Benefits from Improved Accuracy & Savings
The state of Oregon has a “Green Light Preclearance Program” where Weigh-In-Motion (WIM) sensors are used to verify vehicle weights and information, which allows them to bypass static weigh stations. Improving performance of WIM sensors would have the dual benefits of allowing commercial vehicle operators to bypass the stations, as well as decreasing the amount of traffic processed by ODOT’s stations.
The state of Oregon has a “Green Light Preclearance Program” where Weigh-In-Motion (WIM) sensors are used to verify vehicle weights and information, which allows them to bypass static weigh stations. Improving performance of WIM sensors would have the dual benefits of allowing commercial vehicle operators to bypass the stations, as well as decreasing the amount of traffic processed by ODOT’s stations.
Apr, 26 2019
Category: ITS/Enforcement
Category: ITS/Enforcement
Dynamic Weighbridge Scales for Automated Gates
Now Showing: By integrating the WIM scales into existing automated gate systems, weights can be associated with vehicle records to rapidly process transactions while increasing safety, efficiency, and compliance with regional weight regulations.
Now Showing: By integrating the WIM scales into existing automated gate systems, weights can be associated with vehicle records to rapidly process transactions while increasing safety, efficiency, and compliance with regional weight regulations.
Feb, 21 2019
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Portable Vehicle Enforcement with LS630-WIM™ Scales in Kentucky
In the US, states must meet a federal requirement to collect commercial vehicle data and report back with this information. By deploying portable scale systems, the Kentucky Highway Patrol would capture these weights for federal compliance, and also use them for overweight enforcement.
In the US, states must meet a federal requirement to collect commercial vehicle data and report back with this information. By deploying portable scale systems, the Kentucky Highway Patrol would capture these weights for federal compliance, and also use them for overweight enforcement.
Feb, 06 2019
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Overweight Identification on Toll Roads - Autostrade per l’Italia
Tolling concessionaires’ largest expense is upkeep of their roads and infrastructure. Over time, overweight vehicles can damage roadways and bridges, so identification of these vehicles can help maintain, or even add to, the lifetime of the infrastructure.
Tolling concessionaires’ largest expense is upkeep of their roads and infrastructure. Over time, overweight vehicles can damage roadways and bridges, so identification of these vehicles can help maintain, or even add to, the lifetime of the infrastructure.
Dec, 03 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: WIM Site In-Service Evaluation – COST 323
With over 20,000 km of national roads to monitor, Poland currently uses High-Speed Weigh-In-Motion (HS-WIM) for overloaded vehicle screening, and is now evaluating HS-WIM technology for direct enforcement.
With over 20,000 km of national roads to monitor, Poland currently uses High-Speed Weigh-In-Motion (HS-WIM) for overloaded vehicle screening, and is now evaluating HS-WIM technology for direct enforcement.
Nov, 20 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp Presents WIM Technology to China Conference of Road Administration
Wuhan, China – Intercomp and its business partner in China presented on dynamic strain gauge sensors and offered a global perspective of Weigh-In-Motion (WIM) installations around the globe at the 3rd Conference of Road Administration in China held October 31-November 2 in Wuhan China.
Wuhan, China – Intercomp and its business partner in China presented on dynamic strain gauge sensors and offered a global perspective of Weigh-In-Motion (WIM) installations around the globe at the 3rd Conference of Road Administration in China held October 31-November 2 in Wuhan China.
Oct, 24 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
OIML R134 WIM Certification for Intercomp’s LS-WIM Axle Scale
Intercomp’s LS-WIM Axle Scale is now OIML R134 Certified for use in Weigh-In-Motion (WIM) applications. Already NTEP certified in the US for static mode, the OIML certified scale features a weighing capacity of 44,000 lb (20,000 kg) per axle which allows users to easily weigh heavy commercial vehicles.
Intercomp’s LS-WIM Axle Scale is now OIML R134 Certified for use in Weigh-In-Motion (WIM) applications. Already NTEP certified in the US for static mode, the OIML certified scale features a weighing capacity of 44,000 lb (20,000 kg) per axle which allows users to easily weigh heavy commercial vehicles.
Oct, 18 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Intercomp Strip Sensors at Border Crossing for Tolling and Screening
With a high traffic load at the border, Intercomp strip sensors allow automation of weight-based transactions, which will be vital to meet the steady growth in traffic expected at the Laredo, Texas border crossing over the next decade.
With a high traffic load at the border, Intercomp strip sensors allow automation of weight-based transactions, which will be vital to meet the steady growth in traffic expected at the Laredo, Texas border crossing over the next decade.
Sep, 25 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
NTEP Certification for Intercomp’s Low-Profile LP788™ Wheel Load Scale
Intercomp’s new LP788™ is now NTEP Class IIII Certified for direct enforcement for static wheel load weighing.
Intercomp’s new LP788™ is now NTEP Class IIII Certified for direct enforcement for static wheel load weighing.
Mar, 08 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Efficient Pre-Selection In Uruguay
Using mainline screening to identify potentially overweight vehicles at high speeds, Uruguayan infrastructure company, CIEMSA, aims to improve performance of existing in-road sensors to affect downstream weigh station efficiency.
Using mainline screening to identify potentially overweight vehicles at high speeds, Uruguayan infrastructure company, CIEMSA, aims to improve performance of existing in-road sensors to affect downstream weigh station efficiency.
Jan, 24 2018
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp WIM Sensors are Pre-screening in Colombia for Vehicle Enforcement
Intercomp’s Weigh-In-Motion strip sensors have been installed at four High Speed Weigh-In-Motion (HSWIM) systems in Colombia, operating as vehicle screening and enforcement sites for overweight vehicle identification.
Intercomp’s Weigh-In-Motion strip sensors have been installed at four High Speed Weigh-In-Motion (HSWIM) systems in Colombia, operating as vehicle screening and enforcement sites for overweight vehicle identification.
Oct, 02 2017
Category: ITS/Enforcement
Category: ITS/Enforcement
North Carolina adds additional LS630-WIM™ Scales for Vehicle Enforcement
Minneapolis, MN - Intercomp’s LS630-WIM™ portable scale systems have been selected by the North Carolina State Highway Patrol, adding to their existing portable scales which meet the requirements for Low-Speed Weigh-In-Motion (LSWIM) vehicle screening and direct enforcement for vehicle weights.
Minneapolis, MN - Intercomp’s LS630-WIM™ portable scale systems have been selected by the North Carolina State Highway Patrol, adding to their existing portable scales which meet the requirements for Low-Speed Weigh-In-Motion (LSWIM) vehicle screening and direct enforcement for vehicle weights.
Jun, 09 2017
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Dynamic Weighbridge Technology for Gate Operations - Thessoloniki, Greece
Rapid collection of weights during standard gate vehicle processing is vital to increasing the level of automation of port and terminal procedures.
Rapid collection of weights during standard gate vehicle processing is vital to increasing the level of automation of port and terminal procedures.
May, 25 2017
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Data Collection on I-90 in Washington State, USA
The Washington State Department of Transportation is using Intercomp strip sensors for data collection at high speeds up to 80mph (130kmh) on Interstate 90.
The Washington State Department of Transportation is using Intercomp strip sensors for data collection at high speeds up to 80mph (130kmh) on Interstate 90.
Feb, 24 2017
Category: ITS/Enforcement
Category: ITS/Enforcement
Application Note: Weigh-In-Motion Screening for Enforcement
When comparing GVW accuracy of Weigh-In-Motion to static scales, Oregon DOT was “…quite impressed with the numbers, especially considering the time of year and condition of the roadway.”
When comparing GVW accuracy of Weigh-In-Motion to static scales, Oregon DOT was “…quite impressed with the numbers, especially considering the time of year and condition of the roadway.”
Dec, 15 2016
Category: ITS/Enforcement
Category: ITS/Enforcement
Intercomp Dynamic Weighbridges for Cargo Weighing
Now Showing! See Intercomp's SOLAS Method 1 Weigh-in-Motion Systems Video!
Sep, 01 2016
Category: ITS/Enforcement
Category: ITS/Enforcement
Seattle (SDOT) puts Portable Weigh-In-Motion to Use and Sees Immediate Results
The city of Seattle recently showcased the latest technology and trends in Commercial Vehicle Enforcement including Intercomp’s portable Weigh-In-Motion system. These systems consist of two scales, roll-out ramps, and an indicator that allows them to be transported and deployed where weigh stations don’t exist.
Jul, 29 2016
Category: ITS/Enforcement
Category: ITS/Enforcement
Central American Port - Puerto Cortés, Honduras Installs Weigh-In-Motion Container Weighing Systems
Intercomp recently partnered with Puerto Cortés in Honduras for the installation of Weigh-In-Motion (WIM) systems. The integrated systems are monitoring vehicle and container weights for Method 1 SOLAS compliance at the gate of the port complex.
Jul, 20 2016
Category: ITS/Enforcement
Category: ITS/Enforcement
LS630 Application Note: Florida DOT Utilized Intercomp Portable Scales for Static, In-Ground Use
The Florida DOT had a static weight enforcement site out of commission, so they utilized portable scales for static, in-ground use. LS630 portable scales were deployed at a permanent weigh station to gather legal (static) weights for multiple weeks, allowing for weight enforcement with the NTEP approved scales and weighing indicator.
Jan, 20 2016
Category: ITS/Enforcement
Category: ITS/Enforcement
Weigh-In-Motion at the Gate
Measuring cargo and vehicle weights are a necessary component of operations at intermodal terminals. However, static weighing causes vehicle congestion, and terminal efficiency at the gate has decreased in the process.
Oct, 07 2015
Category: ITS/Enforcement
Category: ITS/Enforcement
Jul, 15 2015
Category: ITS/Enforcement
Category: ITS/Enforcement
Container Terminal Weigh-In-Motion Scales
Intercomp is pleased to announce that Weigh-In-Motion Scale Systems have been selected and installed for use in the lanes at the West Basin Container Terminal (WBCT) within the Port in Long Beach, CA. The WBCT partnered with Intercomp to increase efficiency and overall terminal, in-gate velocity in the flow of trucks through the security entrance.
Aug, 20 2014
Category: ITS/Enforcement
Category: ITS/Enforcement
High-Speed Strip Scales feature Superior Accuracy with Ease-of-Install
Intercomp’s new, revolutionary High-Speed Strip Scales provide In-Ground Weigh-In-Motion capabilities featuring industry-leading strain gauge load cell technology for increased accuracy, repeatability and fast response times.
Nov, 13 2013
Category: ITS/Enforcement
Category: ITS/Enforcement
NTEP Certified Wireless Portable Weighing System
Intercomp’s new LS630-WIM™ is NTEP Class IIII Certified for Direct Enforcement in static mode and functions as a portable weigh-in-motion station for enforcement screening in dynamic mode.
